IMF Drones

Drone kits · Washington, DC

Become a drone pilot and an engineer.

IMF Drones is a DC-based drone kit company. We build kits for new flyers and professionals alike, and we shape the engineering experience around you, whatever your background or workshop.

Five questionsOne kit that fits you

About IMF Drones

Flying is the start. Engineering is the point.

IMF Drones is a DC-based drone kit company that seeks to provide drones and drone kits to new flyers and professionals alike. Beyond flying drones, we want to curate the engineering experience for our pilots, regardless of your previous experience with engineering or your current engineering infrastructure. Become a drone pilot and an engineer today when you buy your first kit and/or enroll in a class.

Two ways in

Start with a kit, a class, or both.

Not sure where you fit? The quiz looks at your drone type, building experience and tool access, then points you to a kit.

Drone kits

Quad-copter, fixed wing and VTOL builds for pilots at every level, from a first drone to a professional project.

Classes

Enroll to learn the engineering behind the build, with support that meets you at your level.

Any starting point

Three build levels let you choose how much you assemble, from snap-fit to a full build from a CAD file.

Build levels

Three levels. You choose how much you build.

Every level ends with a drone you assembled yourself. What changes is how much arrives ready-made and which tools you need on your bench.

Level 1 · Starter

Snap-fit and plug and play

Fromquad-copter

The quickest route from box to sky. Most of the chassis snaps together, a few screws hold the electronics, and every electrical connection is a plug.

What you do

  • Snap the chassis together.
  • Screw the flight controller to the ESC and to the drone.
  • Screw the rotors onto the drone.
  • Plug the battery into the ESC with its easy-connect plug.
  • Plug the rotors into the ESC.
  • Optionally plug in an FPV camera, a VTX and an ELRS receiver, which use the same plug-and-play connectors.

What you need

  • A precision screwdriver set.

Skill: none. No soldering.

Level 2 · Builder

Pre-made chassis and light soldering

Fromquad-copter

The chassis parts arrive ready-made. You take on your first soldering jobs: the plug-and-play joints that connect to the ESC, and the easy joints on the flight controller.

What you do

  • Fit the pre-made chassis parts together.
  • Solder the plug-and-play joints to the ESC.
  • Solder the FPV camera or VTX to the flight controller at the easy solder points.
  • Solder the ELRS receiver to the flight controller.
  • Finish the remaining mounting and connections.

What you need, on top of Level 1

  • A soldering iron.
  • Solder, flux and a helping-hands or board holder.
  • Wire strippers and cutters.
  • Heat shrink for insulating joints.
  • A multimeter is recommended.

Skill: a little soldering practice. A few practice joints on scrap wire is enough.

Level 3 · Pro

Components, wires and a CAD file

Fromquad-copter, CAD file included

You receive the components and wires with nothing soldered to any board, and no chassis. In its place you get a CAD file, plus extra parts you can add from the CAD hub to match your preferences.

What you do

  • Print the chassis from the CAD file, on your own printer or through a school, library or print service.
  • Choose extra parts from the CAD hub for your drone type.
  • Solder or crimp every connection yourself: battery lead, rotors to the ESC, FPV camera or VTX and ELRS receiver to the flight controller.
  • Test each connection, then configure and tune.

What you need, on top of Level 2

  • A temperature-controlled soldering station.
  • A crimping tool.
  • A 3D printer or access to one.
  • A multimeter, plus a hobby knife and small files for cleaning printed parts.

Skill: comfortable soldering, including small pads, and reading a wiring diagram.

Every levelA computer to configure the flight controller and radio, and a LiPo balance charger with a fire-safe bag for charging.

Side by side

PartStarterBuilderPro
ChassisMostly snap-fitPre-made partsNone. A CAD file you print, plus extra parts from the CAD hub
Flight controller and rotorsScrewed to the drone and ESCMounted with the pre-made chassisMounted to the chassis you print
Battery to ESCPlug-and-play connectorConnector soldered to the ESCYou solder or crimp the lead yourself
Rotors to ESCPlug-and-play connectorsPlug-and-play joints soldered to the ESCYou solder each wire yourself
FPV camera and VTX (optional)Plug and playSoldered to the flight controller at easy pointsWired and soldered by you
ELRS receiver (optional)Plug and playSoldered to the flight controllerWired and soldered by you
SolderingNoneLightFull build, nothing pre-soldered
Main extra toolsPrecision screwdriversSoldering iron, solder, strippersTemperature-controlled station, crimper, 3D printer

Not sure which level matches your tools? The in-depth quiz asks what you have on your bench and recommends a level.

Pricing

Do more of the building, pay less.

Each level hands you more of the work, so it costs less. Fixed wing and VTOL aircraft cost more than quad-copters because they use more complex airframes and extra parts. All prices are in US dollars.

Drone typeLevel 1 · StarterLevel 2 · BuilderLevel 3 · Pro

CAD file on its own

The airframe design for your drone type, ready to print. It is included with every Level 3 Pro kit.

The quiz recommends a kit and shows its exact price for your drone type and level.

Schools & STEM organizations · DC, Maryland, Virginia

Bring hands-on drone engineering to your students.

We are looking to partner with schools and STEM enrichment organizations across the DMV. Students get to build the aircraft they fly, which makes engineering something they can see and test.

Every skill level, one program

The three build levels let a mixed group work side by side, from first-time builders to experienced students.

No lab required

Our approach is built for programs with limited engineering infrastructure. We work with the tools and space you have.

Local to the DMV

As a DC-based company, we can work with programs across the region and shape a partnership around your students.

School and program bundles

Every bundle includes a Level 1 Starter quad-copter kit for each drone, plus the curriculum. There is no soldering and no lab required.

The curriculum outlines what to cover from 6th grade through college. The quiz shows how we match a program's tools to a build level.